Conproco Product Binder

Elastideck

Coverage/Yield n

Limitations n

Health and Safety n Product is alkaline. n Do not ingest. n

80 ft. 2 /25 lbs. kit per coat @ 50 mils.

Do not apply unless substrate and ambient temperature can be maintained at a minimum of 45°F for 24 hours. Refer to ACI Cold Weather Application Guidelines. Protect application from precipitation and high wind for at least 24 hours. Do not place rubber mats or equivalent on Elastideck for 14 days.

Product Handling Packaging n

Avoid breathing dust.

Avoid contact with skin and eyes. Refer to Safety Data Sheet (SDS) for additional information.

n

3.5 gallon plastic pail contains 12.5 lbs. of powder and 1-1/4 gallons of admix. Shelf Life 18 months when properly stored. Storage Transport and store in cool, clean, dry conditions in unopened containers. High temperature or high humidity will reduce shelf life.

n

n

n

n

First Aid n

n

In case of skin contact, wash thoroughly with soap and water. For eye contact, flush with a high volume of water for at least 15 minutes and contact a medical professional. For respiratory problems, remove person to fresh air.

Do not add water.

n n

n

n

Do not re-temper, polymer modified materials. Avoid overworking material during placement.

Protect from freezing.

n

n

n

Disposal n

Dispose of material in accordance with local, state and federal regulations.

Technical Data Physical state and appearance

White powder and admix.

Base

Powder Liquid Polymer

Portland cement Milky, liquid emulsion Styrene acrylic

pH

Wet mix

>12

VOC

ASTM D3960 ASTM C953 ASTM D2370 ASTM E96 CRD-48-73 ASTM C1519 ASTM C1353

Less than 0.15 lbs./gal. (per mixed kit) Initial 120 minutes – Final 300 minutes

Setting time Elongation

180%

Water vapor transmission

8-10 perms

Resistance to hydrostatic pressure

100% reduction

Accelerated weathering Taber abrasion resistance

2000 hours – no effect

2000 cycles, less than 0.8% weight loss (H22 wheel with 500 grams of weight)

Tensile strength – psi Mandrel bend test

ASTM C307 ASTM D522

810

1/8 in. @ 68 o F and 27 o F

FOR PROFESSIONAL USE ONLY Conproco warrants this product for one year from the date of manufacture to be free from manufacturing defects and to meet the technical properties on the current technical data sheet if used as directed within shelf life. User determines suitability of product for use and assumes all risks. Buyer's sole remedy shall be limited to the purchase price or replacement of product, exclusive of labor or cost of labor. September 16, 2024.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED SHALL APPLY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CONPROCO CORP SHALL NOT BE LIABLE UPON ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES.

TELEPHONE 800.258.3500 • FAX 603.743.5744 • WEB ADDRESS www.conproco.com