Conproco Product Binder

Conpro Super Seal

Limitations n

Coverage/Yield n

Avoid contact with skin and eyes. Refer to Safety Data Sheet (SDS) for additional information.

n

Do not apply unless substrate and ambient temperature can be maintained at a minimum of 45°F for 24 hours. Refer to ACI Cold Weather Application Guidelines. Cold mixing water and low temperature will retard set. Hot water and high temperature will accelerate set. Protect application from precipitation and high wind for at least 8 hours. Do not add more water than specified. Do not apply over active leaks. Treat leaks first with ProMasonry Hydraulic Plug.

150 ft 2 /50 lbs. @ 50 mils.

n

Product Handling Packaging n

50 lb paper bag and 22 oz. plastic container of Conpro Super Seal Admix. Shelf Life Bag - 12 months when properly stored. Admix - 18 months when properly stored. Storage Transport and store in cool, clean, dry conditions in unopened containers. High temperature or high humidity will reduce shelf life.

n

First Aid n

In case of skin contact, wash thoroughly with soap and water. For eye contact, flush immediately with a high volume of water for at least 15 minutes and contact a medical professional. For respiratory problems, remove person to fresh air.

n

n

n

n

n

n

n

n

Disposal n

Health and Safety n Product is alkaline. n Do not ingest. n

Protect Admix from freezing.

Dispose of material in accordance with local, state and federal regulations.

n

Avoid breathing dust.

Technical Data Physical state and appearance

Fine, gray or white powder and admixture.

Base

Powder Liquid

Portland cement Milky, viscous liquid

pH

Wet mix

>12 0.45

Liquid/cement ratio

Density Density Pot life

Wet mix Hardened

93 lbs./ft. 3 100 lbs./ft. 3

20 - 40 minutes

Durometer hardness

ASTM D2240 ASTM E514

80 - 85

Water penetration and leakage Resistance to hydrostatic pressure Concrete block

100% reduction in leakage

57 ft. – 2 coats 103 ft. – 3 coats 7 Days

CRD-48-73

14 Days

28 Days

Compressive strength - psi

ASTM C109 ASTM C307

5775

6125

6350

Tensile strength - psi

230

420

450

FOR PROFESSIONAL USE ONLY Conproco warrants this product for one year from the date of manufacture to be free from manufacturing defects and to meet the technical properties on the current technical data sheet if used as directed within shelf life. User determines suitability of product for use and assumes all risks. Buyer's sole remedy shall be limited to the purchase price or replacement of product, exclusive of labor or cost of labor. November 3, 2016.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED SHALL APPLY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CONPROCO CORP SHALL NOT BE LIABLE UPON ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES.

17 PRODUCTION DRIVE, DOVER, NH 03820 TELEPHONE 800.258.3500 • FAX 603.743.5744 • WEB ADDRESS www.conproco.com